Skip to main content

Full text of "Outdoors"

See other formats

Bundle Bow and Arrow 

Make] Projects 

hhiiilH ho/ 1 !/ tuMaal/ chare r\icf*f\\tat* 

build, hack, tweak, share, discover,- 

Bundle Bow and Arrow 

Written By: Kathreen Ricketson 



Brushes (1) 
Clamp (1) 
Hacksaw (1) 
Hacksaw blades (2) 
Pencil sharpener (1) 
Safety gloves (1) 
Scissors (1) 
Tape measure (1) 
Trimming knife (1) 

Bamboo pole (1) 

Jute twine (1) 

Nylon string (1) 

Epoxy glue (1) 

Sander (1) 

Dowel (1) 

Feathers (1) 

Cotton string (1) 

Varnish (1) 

Binding varnish or nail polish. 

Cardboard (1) 

Paint (1) 


By Kathreen Ricketson, Rob Shugg, and Orlando Shugg 

As a boy, my partner Rob Shugg always had a bow and arrow. He was quite a little 
ragamuffin and had a wonderfully free and adventurous childhood, very different from all the 

© Make Projects 

Page 1 of 8 

Bundle Bow and Arrow 

cautionary parenting of today. 

With the resurgence of books about adventures for kids and 19th-century DIY projects, 
some of these more exciting pastimes are enjoying a comeback. Rob wanted to share some 
of these adventures with our son, 5-year-old Orlando, who is only too happy to go along for 
the ride. Making the bow and arrow is their first step toward a bush camping trip they're 
planning for later in the year. 

For this father-and-son weekend project, we made a simple, safe, and sturdy bundle bow out 
of bamboo that's fairly quick to make with materials available at any hardware shop. We 
chose bamboo because of its strength, flexibility, and availability, but other materials, such 
as straight sticks or fiberglass, can be used. 

A bundle bow, also called a quick bow, is made from a few straight sticks of varying length 
that are bound into a bundle. Bundling sticks of different lengths adds stiffness to the center 
of the bow and allows flexibility toward the limbs. 

The trick to getting the bow to bend correctly is to make it symmetrical, with tension that 
gradually tapers off toward the ends. The shortest stick is half the length of the longest one, 
while the middle sticks extend somewhere in between. 

© Make Projects Page 2 of 8 

Bundle Bow and Arrow 

Step 1 — Make the bow: shape the bow's center, and smooth out the 

• Using a small axe, split the bamboo into 1"-wide strips. You'll need 4 straight, cut, and 
trimmed sticks in total. From the ground, measure the length of the bamboo against the 
intended user, mark the spot at the user's forehead, then cut 1 piece of bamboo to that 
length, 1 to half that length, and 2 lengths in between. When the 4 are clumped together, 
the center should be about 1" square. 

• Trim the bamboo sticks with the trimming knife, then sand them down with the sander. 
Make them all as even in thickness and width as you can. 

• Also sand the internal knobs of the bamboo to make it smooth all over. Sand and whittle a 
little until the pieces lay flat against each other. Bamboo edges can be sharp, so you may 
want to wear safety gloves. 

© Make Projects 

Page 3 of 8 

Bundle Bow and Arrow 

Step 2 — Notch the ends, and tie the sticks together. 

• Use the trimming knife to make the notch at each end of the longest bamboo stick for the 
string to sit on. By cutting just outside the bamboo knot at each end, you'll minimize 
splitting later. 

• Starting with the 2 longest sticks, lash together each piece of bamboo firmly as you go, 
using strong twine such as jute, hemp, or linen. Knot firmly using a whip finish knot. Test 
the symmetry of the bend by flexing the bundled lengths. 

© Make Projects 

Page 4 of 8 

Bundle Bow and Arrow 

Step 3 — Make the arrow rest and handle, make the bowstring, and string 
the bow. 

• Wrap a stiff, thick nylon cord around the center section of the bow and use a hidden whip 
finish knot to make a smooth finish. This does double duty as the arrow rest and the 
handle; make it slightly bigger than the user's hand. 

• Use a nylon or polyester cord to make the bowstring (thin enough to fit the small arrow 
you'll make, but not so thin that it will cut small fingers). Tie one end of the string with a 
hitch knot, then the other end with a loop formed by a bowline or figure-eight loop. Use trial 
and error to get the length just right. 

• Fasten the hitch knot over 1 notch and place that end of the bow on the ground. Hold the 
other end up and bend the bow to slip the loop over the top notch. It's best to unstring the 
bow when it's not in use. 

© Make Projects 

Page 5 of 8 

Bundle Bow and Arrow 

Step 4 — Make the arrow: cut the dowel, and split the fletching. 

• To measure the correct length of the arrow for the user, ask her or him to draw the bow 
using an extra-long piece of dowel, and mark the shaft 1" in front of the spot where the 
dowel touches the arrow rest. Cut the lengths of dowel (look for those that have a straight 
grain running parallel with the shaft). 

• The nock keeps the arrow in place on the string when the bow is drawn. To your hacksaw, 
attach 2 fine blades together in opposite directions. Clamp the dowel to something so that 
it's vertical, and cut a nock to comfortably fit the bowstring. Sharpen the dowel with a 
pencil sharpener. 

• Fletchings stabilize the flight of the arrow and are traditionally made from feathers. We 
used chicken and cockatoo feathers, but turkey feathers are best. Using scissors or a 
trimming knife, halve the feathers lengthwise down the center of the quill, then trim to 
about 3" long. 

• Each half-feather has a natural cup that imparts spin to the arrow. Use fletches that are 
cupped in the same direction to provide a slight rotation that improves accuracy. 

© Make Projects 

Page 6 of 8 

Bundle Bow and Arrow 

Step 5 — Attach the f letches, trim, and glue. 

• Using sticky tape to temporarily hold it in place, attach the first fletch at 90° to the nock. 
Wrap the cotton thread around the shaft at the top end of the fletch to position it, then 
attach the second fletch 1/3 of the way around, and the last one 2/3 around. 

• Check positioning to ensure that the fletches all face the same way and are evenly 
spaced. Wrap the twine around the shaft, covering the front edges of the fletching. Then tie 
down the back ends of the fletches in the same way. 

• Put a few drops of varnish onto the twine to bind it firmly, and trim off any excess bits of 
twine and feather. You can use contact glue to press down the length of each fletch, but 
this isn't necessary. 

Step 6 — Make the target and shoot! 

• Paint a target, the bigger the better, 
on a piece of cardboard, styrofoam, 
or a straw bale with paper pinned to 
it. Hang it and start shooting! 

© Make Projects 

Page 7 of 8 

Bundle Bow and Arrow 

This project first appeared in CRAFT Volume 07 , pages 138-141. 

This document was last generated on 2012-11-01 11:54:51 PM. 

© Make Projects Page 8 of 8